Large Wire Tin-Plating and Multi-Head Drawing Tin-Plating Machine Series Large Wire Tin-Plating and Multi-Head Drawing Tin-Plating Machine Series Large Wire Tin-Plating and Multi-Head Drawing Tin-Plating Machine Series

Large Wire Tin-Plating and Multi-Head Drawing Tin-Plating Machine Series

Use: It is mainly used for tin-plating of single large-scale annealing/multi-head drawing annealing soft copper wire

Keywords：

Category:

Product display

Tel：

0512-57699169

Mssages
Poducts

Details

■ Advantages of the machine：


1.The tin-plating furnace and tin tripod of this equipment are integrally cast, and the temperature in the furnace is uniform, with a temperature difference of +1℃ at four corners. 
2.The heating mode is heating by heating tube, which is convenient for maintenance and simple for operation. 
3.The take-up is controlled by special torque motor and frequency converter, which can accurately control the take-up tension. 
4.The cable laying adopts servo motor+precision screw sliding table cable laying, and the cable laying speed is accelerated and decelerated synchronously with the take-up, and the cable laying is neat and flat. 
5.(Optional) Internet of Things function, information of multiple equipment can be integrated on multiple mobile phones or computers, and the operation of the machine, such as temperature setting, power consumption, voltage and current, line speed and power factor, can be checked at any time, so as to realize refined management and lead in the industry. 
6.The products are widely used in IT communication, aerospace, military industry, medical care, locomotives, automobiles, robots, ships, 5G cloud databases and other fields. 

 

Equipment Model

FC-TX2/630

FC-TX4/630

FC-TX16/630

FC-TX24/630

FC-TX32/630

Application

Mainly used for tinning a single large-size annealed soft copper wire

Mainly used for tinning of multi-head parallel annealed soft copper wire

Inlet Dia（mm）

φ0.85～3.0mm

φ0.20～0.50mm

Max Inlet Wire No.

2

4

16

24

32

Linear Speed

Max: 130m/min

Max: 250m/min

Pay-off Method

630 Active pay-off or magnetic powder tension pay-off

630 Multi-wire active pay-off

Pay-off No.

2

4

2

2/3

4

Tinned Method

Hot dip

Capstan Control Method

Motor+invertor

Total Power

32KW

35KW

38KW

65KW

68KW

Take-up Control

Torque motor + torque controller or inverter control

Take Up Operation Mode

Button operation or touch screen operation

Take-up Bobbin Size

500/630

630

Traverse Control Method

Bearing-type polished rod cable device cable or servo motor + precision screw cable

Take-up No.

2

4

2

2/3

4

Dimension (mm)

19000L*2500W*1600H 

22000L*2500W*1600H 

15000L*2500W*1600H 

19500L*2500W*1600H 

21000L*2500W*1600H

Some Customers

Xinhai Gaodao, Huatong Cable, Mingda Cable, Zhongbang Cable, Baosheng Precision, Jiangyang Special, Huaxin Precision, Xingxuande, Bazhou Guoyuan, Zhengzhou Yifang, Vietnam CADZVZ, Ningbo Shimao, Thailand Sword, etc. 

Related Products

EXTERNAL-TRACTION SPLIT-TYPE CANTILEVER SINGLE TWISER

EXTERNAL-TRACTION SPLIT-TYPE CANTILEVER SINGLE TWISER

Equipment Model：External-Traction Split-type Cantilever Single Twister
FC-1+6+12 One-time Layered Strander Series (Small bobbin single wire Pay-off)

FC-1+6+12 One-time Layered Strander Series (Small bobbin single wire Pay-off)

FC-1+6+12 - One Time Layer Bunching Strander Series (630-reel sibling paying-off)

FC-1+6+12 - One Time Layer Bunching Strander Series (630-reel sibling paying-off)

Use: Applicable for normal layered stranding of 19-strand copper wires for BVR and high-temperature wires.
Series of PLC Pitch high speed bunching machine

Series of PLC Pitch high speed bunching machine

Use:mainly bunch electrical wire and automobile wire and so on.Small stranding section area conductor bunching.
Series of PLC Pitch high speed bunching machine（European Type 1000-1600）

Series of PLC Pitch high speed bunching machine（European Type 1000-1600）

Series of Model C High Speed Bunching Machine（Type 300-560）

Series of Model C High Speed Bunching Machine（Type 300-560）

C-type High-speed Strander Series(Type 500-800)

C-type High-speed Strander Series(Type 500-800)

Use: It is applicable for twisting more than seven strands of bare copper wires, tinned wires, silver-plated wires, enameled wires and other conductors, such as automobile wires, electronic wires and power cords.
B-type Ultra-thin Wire High-speed Bunching Machine Series

B-type Ultra-thin Wire High-speed Bunching Machine Series

Use: It is applicable for stranding ultra-thin wire conductors (more than seven strands of alloy wires, tin-plated wires, silver-plated wires, enameled wires, etc.) in aerospace, medical devices, mobile phones, notebook computers, etc.
B-type Conventional Wire Strander and Pair Strander Series

B-type Conventional Wire Strander and Pair Strander Series

Use: It is applicable for twisting bare copper wire, tin-plated wire, silver-plated wire, enameled wire and other conductors with more than seven strands and twisted core wires.

Get a free product quote

Submit

Contact method

Domestic Marketing Department：Manager Mr. Liu    jsfc@fcjd88.com
International Marketing Department：Ms. Zhou         yw1@fcjd88.com
　　　　　　                                          Ms. Liu            sales01@fcjd88.com
After-sale Service Department：Manager Mr.Gong   +86-0512-57696390
　　　　　　                                Ms. Wang (parts)     +86-0512-57696390

Address:

No.18 Leigongjing Road, Huaqiao Town, Kunshan City, Jiangsu Province (Head Office)

Factory Building No.3, No.8 Jiangnan Road, Wusong, Kunshan Development Zone, Jiangsu Province (Branch)

No.9-6 Weiliu Road, Dongtai Economic Development Zone, Jiangsu Province (Branch) 

Copyright © 2022 Kunshan Fuchuan Machinery Technology Co., Ltd.

Designed By：www.300.cn | SEO  Business license