High-speed Annealing Tinning Machine Series for Ultra-Thin Wires
Use: It is mainly used for annealing and tin-plating of ultra-fine round copper wire and alloy wire
Keywords：
Category:
Details
■ The machine was put into production in Jiangsu with Japanese technology
■ Patent number : ZL 2012 1 0359614.X
■ Advantages of the machine：
1.The annealing furnace is designed as a whole, which has good heat preservation effect and saves about 30% electricity compared with similar products.
2.The heating mode is heating by heating tube, which is convenient for maintenance and simple for operation.
3.The temperature difference between furnace tubes is less than 5℃, and nitrogen or steam protection device is used for annealing, so that the elongation of copper wire is uniform.
4.Tin-plating furnace tin tripod is cast as a whole, and the temperature in the furnace is uniform, with a temperature difference of ±1℃ at four corners.
5.The voltage of take-up tension at each end is digital display, which can accurately adjust the tension. The take-up and pay-off positions are equipped with energy-saving lighting lamps, which is convenient for operation and threading.
6.(Optional) Switch the cable arrangement function of different take-up reels with one key in the touch screen, eliminating the need to manually adjust the width of the cable arrangement.
7.(Optional) Internet of Things function, information of multiple equipment can be integrated on multiple mobile phones or computers, and the operation of the machine, such as temperature setting, power consumption, voltage and current, line speed and power factor, can be checked at any time, so as to realize refined management and lead in the industry.
|
Equipment Model |
FC-TX16 |
FC-TX20 |
FC-TX32 |
FC-TX42 |
FC-TX48 |
|
Twisting Usage |
Series for UItra-fine high speed annealing tin machine |
||||
|
Inlet Dia（mm） |
φ0.025～0.05 |
φ0.03～0.08 |
φ0.04～0.127 |
φ0.05～0.127 |
φ0.06～0.16 |
|
Max Inlet Wire No. |
16 |
20 |
32 |
42 |
48 |
|
Linear Speed |
Max:300m/min |
||||
|
Pay-off Method |
Brush pay off |
||||
|
Annealing Furnace Length |
2m |
2.5m |
3.0m |
3.5m |
3.5m |
|
Annealing Method |
Tube annealing |
||||
|
Annealing Protection Method |
Nitrogen protection or vapour protection |
||||
|
Tinned Method |
Hot dip |
||||
|
Capstan Control Method |
Motor+Invertor |
||||
|
Total Power |
32KW |
35KW |
38KW |
65KW |
68KW |
|
Take-up Control |
Take-up is voltage regulator control the moment motor |
||||
|
Take Up Bobbin Size |
3inch,5inch bobbin |
3inch,5inch,8inch bobbin |
|||
|
Traverse Control Method |
Geared motor + frequency conversion control cable or servo motor + PLC control |
||||
|
Meter Counting Method |
Single-head independently meter counting，and the machine will stop when the preset length is arrived |
||||
|
Installation Size (mm) |
16000L*1000W*1250H |
18000L*1450W*2000H |
23000L*1700W*2000H |
25500L*1900W*2100H |
27500L*1900W*2100H |
|
Some Customers |
Tonytech, Hitachi Cable, Shenzhen Xindian, Furuixiang Electronics, Yuanhong Technology, Baosheng Precision, Zhenxiong Group, Changzhou Hengfeng, Nuokewei, Jiangxi Ruishun, Dongyi New Materials, Kunshan Huirong, Jiangyin Shuangyu, Ningbo Bolude, Tongya Electronics, Xinxieji, Tongsheng Electronics, etc. |
||||
Related Products
FC-1+6+12 - One Time Layer Bunching Strander Series (630-reel sibling paying-off)
B-type Ultra-thin Wire High-speed Bunching Machine Series
C-type High-speed Strander Series
B-type Conventional Wire Strander and Pair Strander Series
B-Type Large Wire Strander and Pair Strander
Get a free product quote